Whirlpool Oven Service Bulletins

It is possible that consumers may experience “no heat” during the first cooking cycle after applying power to the system. This is due to the ACU requiring more time than the HMI to boot successfully.

It’s possible that consumers will experience an unresponsive (frozen) screen while entering the “Self Clean” cycle. This state may prevent the user from entering commands on the human-machine interface (HMI).

It is possible that consumers might experience the following: -Erratic oven performance -Oven light stays on -Warm control panel -Control failure -Door misaligned -Door doesn’t close completely

It is possible, in rare circumstances, that consumers may experience deformation of the left-front and/or right-front burner assemblies under heavy usage when converted to LP. The conversion to LP is necessary when the installation site does not have natural gas service. This concern is not present when configured for natural gas.

Under certain circumstances oven temperatures may not reach desired temperatures

Top of Oven Door may seem hot to some customers

Oven Door Glass is loose

Moisture could escape from upper oven

The fully extendable roller rack with handle may disengage when fully extended, posing a potential burn hazard to consumers. While waiting for a free repair or repair kit, consumers should not use the roller rack. If possible, remove the roller rack and keep it for

The gas oven will not light or heat (the cooktop burners operate).