Whirlpool Oven Service Bulletins

In certain circumstances, consumers may report the convection element powered on following a power outage. This potential cause does not pose a safety risk to the consumer because only the oven’s heating elements are susceptible to unintended activation and the oven is protected from overheating per UL 858. The exposed elements on the cooktop are controlled on a separate circuit not impacted by this issue.

F3 Error Code Due To Harness Failure

Customers may complain of noise, rattle, or vibration during operation.

In certain circumstances consumers may report units beeping, and sometimes displaying an F2E1 error code. In rare instances, consumers may report the unintended activation of the oven’s heating elements.

During extreme and unlikely usage conditions, the induction cooktop may turn itself off for self protection. If this happens, the cooktop will become unresponsive and will not turn on again by pushing on the on button.

Some consumers may experience one or more of the following with the UI: 1. App Status -The oven info and the mobile app info may not match. 2. Clock adjustment – Oven clock may update to incorrect time. 3. WiFi connectivity – After provisioning the oven to network, the UI WiFi logo shows a red exclamation point and oven may not connect. 4. Scrolling – The UI menu may reset to the starting point when scrolling. 5. Locating WiFi network – The oven’s WiFi search function may not find expected WiFi networks without cycling power. 6. Incorrect password delay – There may be a delay after entering an incorrect password before the UI reports the password was incorrect.

Specified dimensions will not allow correct retrofit of products for flush installation and there’s a possibility of building cabinets in which the product will not fit.

Specified dimensions will not allow correct retrofit of products for flush installation and there’s a possibility of building cabinets in which the product will not fit.

The current terminal block uses attachment points on the front side for the ring terminals. The new terminal block will use attachments on the back side. Therefore the ring terminals will have to be rotated 180 degrees.

In certain circumstances consumers may report units beeping, and sometimes displaying an F2E1 error code. In rare instances consumers may report the unintended activation of the oven’s heating elements.