It is possible that under some conditions the service technician may experience the HMI shutting off approximately 5 seconds after entering Service Diagnostic Mode.
Whirlpool Service Bulletins
Whirlpool Washer W11401418 Service Bulletin
It is possible that under some circumstances consumers may experience excessively long wash cycles. Consumers may perceive and report that cycles “run continually” or “do not end”. In addition, clothes may be warm to the touch when checked immediately after the cycle ends or it is stopped.
Whirlpool Washer W11404257 Service Bulletin
Glass Lids have been reported to break during normal operation or when washer is not in use. Although there are many potential causes of glass breakage, a small percentage of washers in this serial range have a weak area within the tempered glass.
Whirlpool Oven W11354284B Service Bulletin
In some possible instances consumers have reported that the inner portion of a coil heating element on their range or cooktop appears to turn on and off, or appears to not glow as brightly as the outer portion of the coil. Some consumers have also reported longer high-heat cooking times, such as the time to boil large volumes of water.
Whirlpool Oven W11408031 Service Bulletin
It is possible that consumers may hear a high pitched ringing radiating from their unit.
Whirlpool Oven W114080311 Service Bulletin
It is possible that consumers may hear a high pitched ringing radiating from their unit.
Whirlpool Fridge-Freezer W11394954 Service Bulletin
Water may not dispense for multiple reasons. No water from dispenser at times.
Whirlpool Fridge-Freezer W11316865 Service Bulletin
Under certain circumstances, customers may report condensation or sweating on the Flipper Mullion.
Whirlpool Dryer W11395626 Service Bulletin
It is possible that consumers might experience an interrupted drying cycle along with F3E3 error display.
Whirlpool Oven W11403099 Service Bulletin
It is possible that consumers may purchase, or select as an exchange alternate, an induction cooktop such that the existing cutout is larger than what is specified in the installation instructions. For cutouts that are within the prescribed width and length, we can provide a service kit with alternate mounting brackets and assembly instructions to assist with this installation.