Whirlpool Washer F24 Error Code

Model Specific Error Code

WFW3090JW WFW5090JW

Overflow Error

If the ACU has read an overflow level on the pressure sensor, the drain pump is turned on for one minute. The wash cycle will continue. The overflow failure condition is reached if the overflow signal is detected five times in the same wash cycle. In an overflow condition, the door will remain locked and the drain pump will run intermittently.

Whirlpool Washer F24 Error Code Error Code Possible Causes

• Wash cycle with high water level was used with too many items/garments
• Make sure that the drain hose is not plugged or kinked
• Check the wire harness connections to the drain pump, pressure sensor, and ACU
• Make sure that the inlet valve is shutting off properly
• Check the drain pump filter for foreign objects and clean, if necessary
• Check for drain pump failure
• Check the pressure sensor for proper operation

Model Specific Error Code

All Others

Thermistor Error

The water temperature sensor (NTC) value is out of range (23°F to 217°F [-5°C to 103°C]) during the water-heating step of the WASH cycle.

Whirlpool Washer F24 Error Code Error Code Possible Causes

• Thermistor fault.
• Wiring or connection fault.
• Main controller fault.

Want more appliance repair information?

Sign Up Today!

Already A Member?

Log In To View

This information is provided for educational purposes only. Please consult the appropriate Service Mode or Technical Document for your model. Always take proper safety precautions when installing or repairing any major appliance.