Alliance Washer Ed 25 Error Code

IPM Over Temperature Error

IPM temperature is detected to be too high. Check that drum spins freely when empty, check for overloading of machine, reduce agitation time, and duty cycle if rotate/ pause times are very short and programmable. Un-power to clear error.

Alliance Washer Ed 25 Error Code Error Code Possible Causes

• The Motor is defective.
• The drum is jammed.
• Lint build-up on drive board heat sink.
• The drive board is defective.
• Wire harness or connection issue

Want more appliance repair information?

Sign Up Today!

Already A Member?

Log In To View

This information is provided for educational purposes only. Please consult the appropriate Service Mode or Technical Document for your model. Always take proper safety precautions when installing or repairing any major appliance.