Whirlpool Fridge-Freezer Service Bulletins

Consumers may experience Light not turning off, No/Low Ice, No/low cool, UI door open alarm due to the RC door switch and switch dike not making contact with each other. This is primarily due to the switch dike being too small.

Warm surface warning sticker does not completely peel off the door. Leaving residue behind.

Whirlpool has identified a limited number of refrigerators with serial labels indicating the product has R134a refrigerant, when the refrigerators are actually charged with R600a refrigerant. The labeling discrepancy is only on the model/serial label inside the refrigerator compartment. The units are correctly fitted with the other required warning labels on the exterior and interior of the product and in the user and service instructions.

Serial number label was placed on the back of the refrigerator instead of inside the refrigerator compartment.

KitchenAid, Jenn-Air, Maytag and Whirlpool French Door Refrigerators/Frost Build Up On Evaporator

It is possible that consumers may experience no water from the dispenser. This can occur for a number of reasons including that the water reservoir is freezing causing no water to be dispensed.

It is possible that consumers may experience no water from the dispenser. This can occur for a number of reasons including that the water reservoir is freezing causing no water to be dispensed.

When checking for refrigerant leaks with Lokring fittings, the color of the Lokprep and the U.V. dye may look very similar.

​Some consumers may experience one or more of the following with the UI: 1. App Status -The oven info and the mobile app info may not match. 2. Clock adjustment – Oven clock may update to incorrect time. 3. WiFi connectivity – After provisioning the oven to network, the UI WiFi logo shows a red exclamation point and oven may not connect. 4. Scrolling – The UI menu may reset to the starting point when scrolling. 5. Locating WiFi network – The oven’s WiFi search function may not find expected WiFi networks without cycling power. 6. Incorrect password delay – There may be a delay after entering an incorrect password before the UI reports the password was incorrect.

It is possible that consumers may experience frost, or hard ice, forming on the front area of the Refrigerator Compartment (RC). In some instances, consumers may also see water inside the RC under the crispers. These symptoms can result from multiple possible causes, so it is important to follow all the correction steps below.