It is possible that consumers might experience an interrupted drying cycle along with an F3E3 error display.
Whirlpool Service Bulletins
Whirlpool Washer W11419643 Service Bulletin
27” Front Load Washer Moisture in Ventilation Tube
Whirlpool Oven W11426978 Service Bulletin
In rare circumstances, consumers may experience an F6E4 error code. This error code is noted in the tech sheet as relating to a “User Interface/Appliance Manager state status mismatch”. This error code could be displayed because of a “Low fan speed – underspeed/overspeed” or “High fan speed – underspeed/overspeed”.
Whirlpool Fridge-Freezer W11406716 Service Bulletin
The in-door ice maker may stop working, or work intermittently. The customer may report low or no ice production.
Whirlpool Oven W11422873 Service Bulletin
Self Retracng Oven Glide Racks
Whirlpool Washer W11396914 Service Bulletin
The product may display the dEn error code when trying to start a cycle which signifies that the unit is in Demo Mode.
Whirlpool Dryer W11378591A Service Bulletin
t is possible that under some conditions, dryer operation may be a bit louder than expected. Consumers experiencing excessive loudness or specific sounds described as rubbing, screeching, or knocking, may have a blower wheel that is too close to or impacting the collar or blower housing. Additionally, noise may come from the motor bracket vibrating against the dryer base.
Whirlpool Oven W11251040B Service Bulletin
Under certain conditions, it is possible that consumers will experience their oven light turning on by itself.
Whirlpool Oven W11413630 Service Bulletin
Occasionally, users may find the powered attachment accessory does not connect properly to the oven. This can lead to an error in the detection of the accessory, which can lead to an “F3E4: Upper/main Accessory RTD open/short” error code or possibly a frequent chime for “Accessory Detected” (chime tone goes up and accessory icon illuminates on User Interface) and then “Accessory Removed” (chime tone goes down and accessory icon in User Interface goes away). This can cause dropped cycles or reduced performance and colder cooking.
Whirlpool Washer W11395614 Service Bulletin
Technician may find that the door is locked but the washer won’t start, tumble, or spin. Unit might show “Maximum Spin Speed Not Reached” error code F34 during the service test cycle.