Will Not Run Cycle
Whirlpool Service Bulletins
Whirlpool Fridge-Freezer W11560805D Service Bulletin
It is possible that consumers may experience a build up of frozen water outside of the ice maker, fill tube, fill cup, and in the ice bin that may reduce ice production
Whirlpool Fridge-Freezer W11626371 Service Bulletin
It is possible customers may experience dispenser switches stuck and water continues to run after releasing the dispenser button.
Whirlpool Washer W11624962 Service Bulletin
It is possible that during or after the wash cycle the machine will become unresponsive with the wash light illuminated and no flashing or error codes indicated.
Whirlpool Fridge-Freezer W11610345C Service Bulletin
It is possible that the unit will start making an intermittent popping, ticking, knocking, or groaning type noise when the compressor is running.
Whirlpool Washer W11616794 Service Bulletin
Replacement tub assembly may look different than original.
Whirlpool Washer W11618678 Service Bulletin
It is possible that when a service technician enters the service diagnostic mode and clears a fault that a cycle will not start when returning to normal operation.
Whirlpool Fridge-Freezer W11623132 Service Bulletin
It is possible that during ice maker operation, customers may experience abnormal sounds characterized as grinding or squealing coming from the water recirculation pump. Ice production may be reduced when this condition occurs.
Whirlpool Washer W11617330 Service Bulletin
New software has been installed on the models listed above to trigger an out- of-balance alert if the motor’s thermal protection is activated. The controls will display an out-of-balance error, which is also used with physical load out- of-balance conditions, as shown in the pictures below:
Whirlpool Fridge-Freezer W11460554 Service Bulletin
Customers may report that the freezer light has stopped working in certain KitchenAid, Maytag, and Whirlpool French Door Bottom Mount refrigerators. In rare circumstances, the freezer LED Module and its connector may be foamed in, requiring the additional service steps below.