Main Control Board WH22X32357 Unable To Program Model Personality ID
Service Bulletins
Whirlpool Washer W11445524 Service Bulletin
It is possible that consumers may experience excessive shaking or vibration of the washer at the end of the wash cycle or during the spin cycle, as well as related noises
Whirlpool Fridge-Freezer W11451777 Service Bulletin
It is possible that consumers may experience no water from the dispenser. This can occur for a number of reasons including that the water reservoir is freezing causing no water to be dispensed.
Whirlpool Washer W11498806B Service Bulletin
If both the Human Machine Interface (HMI) and Appliance Control Unit (ACU) boards are replaced at same time, the machine may not operate.
Whirlpool Washer W11436352 Service Bulletin
The consumer may notice signs of abrasion or tearing of the bellow. In addition, a small amount of water may drip from behind the front panel and collect underneath the front of the washer.
Whirlpool Washer W11446112 Service Bulletin
The customer may complain that the unit is using too much detergent. It is possible that when using HE detergents with concentration over 2X, consumers may notice excess suds, poor cleaning, or poor rinsing. It’s also possible that the machine will show a 5D suds detection indicator or an F0E2 oversuds error.
Whirlpool Oven W11448213 Service Bulletin
In some instances, technicians may not fully convert a KitchenAid Gas Range from natural gas to propane gas (LP).
Whirlpool Fridge-Freezer W11312536 Service Bulletin
When checking for refrigerant leaks with Lokring fittings, the color of the Lokprep and the U.V. dye may look very similar.
LG Fridge-Freezer CNZ202000133-01 Service Bulletin
BLDC geared auger motor causing a grinding noise.
Whirlpool Fridge-Freezer W11437808 Service Bulletin
Some consumers may experience one or more of the following with the UI: 1. App Status -The oven info and the mobile app info may not match. 2. Clock adjustment – Oven clock may update to incorrect time. 3. WiFi connectivity – After provisioning the oven to network, the UI WiFi logo shows a red exclamation point and oven may not connect. 4. Scrolling – The UI menu may reset to the starting point when scrolling. 5. Locating WiFi network – The oven’s WiFi search function may not find expected WiFi networks without cycling power. 6. Incorrect password delay – There may be a delay after entering an incorrect password before the UI reports the password was incorrect.